[1] 张铖, 梁宪珠, 王永贵,等. 热压罐工艺环境对于先进复合材料框架式成型模具温度场的影响. 材料科学与工程学报, 2011 (4):547-553.
[2] 贾成贵, 朱振生, 王维纲. 大型热压罐装置. 航空工程与维修, 1997 (3):38-39.
[3] 王永贵, 梁宪珠, 曹正华,等. 热压罐工艺成型先进复合材料构件的温度场研究综述. 玻璃钢/复合材料, 2009(3):81-85.
[4] 王晓霞. 热固性树脂基复合材料的固化变形数值模拟[D].济南：山东大学, 2012.
[5] 蔡宏洋. 低粘度中温固化环氧树脂体系研究[D]. 北京：北京化工大学, 2008.
[6] White S R, Hahn H T. Process modeling of composite materials: residual stress development during cure. Part II. Experimental Validation7. Journal of Composite Materials, 1992, 26:2423-2453.
[7] Bogetti T A, Gillespie J W. Process-induced stress and deformation in thick-section thermoset composite laminates. Journal of Composite Materials, 1992, 26(5):626-660.
[8] Yoon K J, Kim J S. Effect of thermal deformation and chemical shrinkage on the process induced distortion of carbon/epoxy curved laminates. Journal of Composite Materials, 2001, 35(3):253-263.
[9] 胡照会, 王荣国, 赫晓东,等. 复合材料层板固化全过程残余应变/应力的数值模拟. 航空材料学报, 2008, 28(2):55-59.
[10] Prasatya P, Mckenna G B, Simon S L. A viscoelastic model for predicting isotropic residual stresses in thermosetting materials: effects of processing parameters. Journal of Composite Materials, 2001, 35(10):826-848.
[11] 郭兆璞, 陈浩然, 段滋华. 复合材料层合板粘弹性固化残余应力分析. 计算力学学报, 1996 (4):401-407.
[12] 郭兆璞, 陈浩然. 复合材料层合板在加工固化后期降温速率对残余热应力. 计算力学学报, 1995(4):387-393.
[13] Kim Y K, White S R. Stress relaxation behavior of 3501‐6 epoxy resin during cure . Polymer Engineering & Science, 1996, 36(23):2852-2862.
[14] Bapanapalli S K, Smith L V. A linear finite element model to predict processing-induced distortion in FRP laminates . Composites Part A: Applied Science & Manufacturing, 2005, 36(12):1666-1674.
[15] 岳广全. 整体化复合材料壁板结构固化变形模拟及控制方法研究[D]. 哈尔滨：哈尔滨工业大学, 2010.
[16] 庞杰. 复合材料结构固化变形分析及其控制[D]. 南京：南京航空航天大学, 2010.
[17] Yi S, Hilton H H. Effects of thermo-mechanical properties of composites on viscosity, temperature and degree of cure in thick thermosetting composite laminates during curing process. Journal of Composite Materials, 1998, 32(7):600-622.
[18] 杨进军. 纤维分布对复合材料固化变形的影响. 纤维复合材料, 2010, 27(1):13-17.
2015, 
